D-SNC-DY-00 PREMIUM FILES - NEW D-SNC-DY-00 TEST BOOK

D-SNC-DY-00 Premium Files - New D-SNC-DY-00 Test Book

D-SNC-DY-00 Premium Files - New D-SNC-DY-00 Test Book

Blog Article

Tags: D-SNC-DY-00 Premium Files, New D-SNC-DY-00 Test Book, D-SNC-DY-00 Dump, D-SNC-DY-00 Dump Torrent, D-SNC-DY-00 Valid Mock Exam

EMC trained experts have made sure to help the potential applicants of EMC D-SNC-DY-00 certification to pass their EMC D-SNC-DY-00 exam on the first try. Our PDF format carries real Dell SONiC Deploy Exam exam dumps. You can use this format of EMC D-SNC-DY-00 Actual Questions on your smart devices.

EMC D-SNC-DY-00 Exam Syllabus Topics:

TopicDetails
Topic 1
  • Routing: Here, your routing knowledge will be tested, particularly in administering L3 IP addressing, configuring static routes, and understanding OSPF and BGP operations. As a cloud engineer, you must be adept at managing routing protocols and configurations to maintain efficient network traffic flow.
Topic 2
  • QoS: Your understanding of Quality of Service (QoS) is essential to become a certified Dell cloud engineer. The exam evaluates your ability to configure and verify QoS features. This section tests your ability to ensure optimal network performance, a vital skill in managing cloud environments where service quality is paramount.
Topic 3
  • VXLAN: This topic focuses on your ability to manage VXLAN operations, including configuring and verifying BGP EVPN with both Asymmetric and Symmetric IRB. Understanding VXLAN is essential for enabling scalable and efficient cloud networks, making this topic critical to your D-SNC-DY-00 Exam Success.
Topic 4
  • SONiC Bundles: In this topic, your understanding of Enterprise SONiC bundles will be assessed. As a cloud engineer, you must be able to compare different SONiC bundles, demonstrating your expertise in selecting the appropriate bundle for various cloud environments. Mastery of this will ensure you can optimize network configurations effectively.
Topic 5
  • SONiC Installation: Your proficiency in SONiC installation, upgrade, and downgrade methods will be tested in this Dell EMC D-SNC-DY-00 exam topic. You will need to install SONiC using both the ONIE manual and automatic methods. This topic measures your hands-on skills in managing SONiC installations efficiently.

>> D-SNC-DY-00 Premium Files <<

Unparalleled D-SNC-DY-00 Premium Files, New D-SNC-DY-00 Test Book

People always want to prove that they are competent and skillful in some certain area. The ways to prove their competences are varied but the most direct and convenient method is to attend the certification exam and get some certificate. The D-SNC-DY-00 exam questions have simplified the sophisticated notions. The software boosts varied self-learning and self-assessment functions to check the learning results. The software of our D-SNC-DY-00 Test Torrent provides the statistics report function and help the students find the weak links and deal with them.

EMC Dell SONiC Deploy Exam Sample Questions (Q39-Q44):

NEW QUESTION # 39
Refer to the exhibit.

What can be determined from this show command?

  • A. There is a 10% probability that traffic is marked as congested
  • B. Traffic below 100 KB is marked as congested
  • C. ECN is enabled for all DSCP values
  • D. ECN is enabled for all colors

Answer: D

Explanation:
The output of the command show qos wred-policy pfc34 shows the ECN (Explicit Congestion Notification) configuration for the policy pfc34. The line ecn: ecn_all indicates that ECN is enabled for all traffic classes (all DSCP values). Additionally, the green-min-threshold, green-max-threshold, and green-drop-probability settings are shown, but there is no indication of a 10% probability for marking traffic as congested. Therefore, the correct answer is B.
References:
* Dell Enterprise SONiC documentation
* Dell Technologies InfoHub


NEW QUESTION # 40
How many times must BGP be configured when running symmetric IRB with two VFRs?

  • A. 0
  • B. 1
  • C. 2
  • D. 3

Answer: C

Explanation:
When running symmetric Integrated Routing and Bridging (IRB) with two Virtual Forwarding Routers (VFRs), BGP must be configured twice. Each VFR will have its own BGP instance to handle the routing information.
References:
* Dell Technologies SONiC Routing Guide
* Dell Networking Configuration Guide


NEW QUESTION # 41
Refer to the exhibits.


PC1 has a valid address on the 192.168.10.0 network, and PC2 has a valid address on the 192.168.20.0 network.
What happens when a ping command is issued between PC1 and PC2?

  • A. The ping is successful because there are two routes from switch1 to switch2 which are connected to PC2.
  • B. The ping is unsuccessful because there is no route from switch 1 to the 192.168.20.0 network.
  • C. The ping is successful because there is a route to 10.0.1.1, which is connected to 1(10.2.2, which is connected to PC2.
  • D. The ping is unsuccessful because there is no route to the VLAN 10 gateway address of 192.168.10.254.

Answer: B

Explanation:
* Network Topology Analysis:
* PC1 is on VLAN 10 with an IP address in the 192.168.10.0/24 subnet.
* PC2 is on VLAN 20 with an IP address in the 192.168.20.0/24 subnet.
* The network uses OSPF for routing between the switches.
* The OSPF area is 0, and all switches have loopback interfaces for OSPF.
* Routing Table Examination (from switch1):
* The show ip route command output from switch1 provides a detailed look at the routing table.
* Routes to the 192.168.10.0/24 network (directly connected via Vlan10) are present.
* No routes to the 192.168.20.0/24 network are listed in switch1's routing table.
* Explanation:
* For PC1 to communicate with PC2, switch1 must have a route to the 192.168.20.0/24 network.
* The absence of a route to the 192.168.20.0/24 network in switch1's routing table means that switch1 cannot forward packets destined for 192.168.20.0/24.
* Therefore, any ping from PC1 to PC2 will be unsuccessful as switch1 does not know how to route packets to PC2's network.
* Verification with Dell SONiC:
* In Dell SONiC environments, OSPF is configured to ensure dynamic routing.
* The configuration must include all necessary networks for inter-switch routing.
* If a network (like 192.168.20.0/24) is not included in OSPF configurations on switch1, routes to that network will not be advertised or learned, leading to failed connectivity tests like the ping from PC1 to PC2.
References:
* Dell Enterprise SONiC Deployment Guide
* Dell Technologies Networking - SONiC


NEW QUESTION # 42
What is the purpose of the write erase boot command option?

  • A. Delete the startup and enable zero touch provisioning.
  • B. Delete the running configuration and all user accounts.
  • C. Delete the startup configuration and the management interface configuration.
  • D. Remove user-installed packages and tile changes.

Answer: A

Explanation:
The write erase boot command option deletes the startup configuration and enables zero touch provisioning (ZTP). This is used to reset the switch to its default state and prepare it for automated configuration through ZTP.
References:
* Dell Technologies SONiC Command Reference Guide
* Switch Configuration Guide


NEW QUESTION # 43
Refer to the exhibit.

The router ID has not been manually configured. What router ID is used for Switch 3?

  • A. 10.0.2.1
  • B. 10.0.1.1
  • C. 192.168.100.0
  • D. 192.168.100.2

Answer: B

Explanation:
In the absence of a manually configured router ID, OSPF typically uses the highest IP address on the switch's active interfaces. For Switch 3 in the exhibit, the highest IP address is 10.0.1.1 on Loopback 0. Therefore,
10.0.1.1 is used as the router ID for Switch 3.
References:
* Dell Technologies SONiC documentation
* OSPF Configuration Guide


NEW QUESTION # 44
......

Laziness will ruin your life one day. It is time to have a change now. Although we all love cozy life, we must work hard to create our own value. Then our D-SNC-DY-00 study materials will help you overcome your laziness. Study is the best way to enrich your life. Our D-SNC-DY-00 study materials are suitable for various people. No matter you are students, office workers or common people, you can have a try. In addition, you can take part in the D-SNC-DY-00 Exam if you finish all learning tasks. The certificate issued by official can inspire your enthusiasm.

New D-SNC-DY-00 Test Book: https://www.real4dumps.com/D-SNC-DY-00_examcollection.html

Report this page